Rotating cylinder in air clamping must be carried out within the clamping stroke, not within the rotating stroke. The clamping plane must be perpendicular to the cylinder axis. Do not move the workpiece after it is clamped. Before cylinder piping, sundries in the pipe must be clear to prevent sundries from entering the cylinder. The medium used for the cylinder shall be filtered by a filter element of more than 40 μ m before use. The cylinder will not be used for a long time after being removed. Pay attention to the rust prevention of the surface. The air inlet and exhaust port shall be equipped with dust-proof blocking cap, and the piston rod end shall be coated with rust proof oil.
