E3X-A11Fiber optic amplifier
●Universal type with 8-shaped rotated adjusting knob to do micro-adjustment
●Double detection distance of traditional product
●With a variable knob
●With pulsing light to respond within an ultra-short time of 20
●Can detect delicate aberration with green light source
The main parameters
| Project |
General-purpose NPN output |
Model：E3X-A11 |
| light source(ight-emitting wavelength) | Red light-emitting diode(660nm) | |
| Voltage | DC10～30v[with the pulse(p-p)10%] | |
| Current consumption | ≤ 35mA | |
| Output Control |
Main voltage of load is below DC35v, load current is below lOOmA(residual voltage below lv)，open-collector output type(NPN or PNP output varies in different state), on when |
|
| Response time | Reset action，≤200us | |
| Protection circuit |
Protection against the power connection ,output short circuit protection to preventinterference function |
|
| Lighting | Smooth by the light ,incandescent 3000rx below ,following the sun lOOOOrx | |
| Ambient temperature | When action:-25～+55℃,save time:40～70℃(there can not be frozen, the phenomenon of condensation) | |
| Insulation resistance | 20mΩ above（DC500MV to trillion dollars） | |
| Voltage resistance | AC1,000V 50/60Hz 1min | |
| Vibration(durable) | 10～55Hz complex amplitude l.5mm X，Y，Z direction of the 2h | |
| Shock (durable) | 500/s2 X.Y.Zdirection of the 3rd | |
| Protection structure | IBC standard IP50(when the installation of protective cover) | |
| Connection | Open-wire lead(standard long line 2m) | |
| Weight(in cases) | 100g | |
| Materials | Shell | ABS Heat-resistant ABS |
| The protective shield |
Polyester |
|
| Accessories |
The installation of metal accessories used to adjust screwdriver, operation manuals |
|
