E3X-NT11 Fiber optic amplifier
Features
●Ultra-thin, is only lOmm thick and ICH based, saving spaces for machines
●Push one button to eaure of IP66, can be safely used even in the humid environment
●The working hours for adjustment are reduced by using the teaching function
Tecnical parameters
| Project | General-purpose NPN output | Model：E3X-NT11 |
|
light source(ight-emitting wave length) |
(380mm) Red light-emittng diode(380mm) | |
| Power supply | DC12～24V±10%of corrugated(P-P)10% of the following | |
| Current consumption | ≤50mA | |
| Output Control | Following is a lOOmA load current(voltage of lV to stay below) show the root NPN/PNP output in the form of different and | |
| Protection of the loop |
Then reverse power protection, output short-circuit protection, mutual interference function. |
|
| Response time |
Action，reversion，the following 500uS(set off in the distance detection) |
|
| Teach-in function to confirm | That light（red，green，2-color，Ming-feng) | |
| Lighting | Smooth by the light，incandescent；3000rx below ,following the sun lOOOrx | |
| Ambient temperature | When action:-2+55℃,savetime:40～70℃(there can not be frozen, the phenomenon of condensation) | |
| Surrounding humidity |
34～85%RH，Save：Save time：35～95%RH (can not have the phenomenon ofcondensation) |
|
| Insulation resistance | 20mΩ 以上（DC500MV以兆计）20mΩ above（DC500MV to trillion dollars） | |
| Voltage | AC1,000V 50/60Hz 1min | |
| Vibration(durable) | 10～50Hz complex amplitude l.5mmor 300m/s2 X,Y,Z direction of the 2h | |
| The impact of(durable) | 500m/s2 X,Y,Z direction of the 3back | |
| Protection of the structure | IBC standard IP50(when the installation of protective cover) | |
| Connection | Lead-based(standard long line 2m) | |
| Weight(in packing cases) | 100g | |
| Materials | Shell | P-ethylene salt ll |
| Theprotective shield | Polyester | |
| Accessories | The installation of metal parts，operating manuals | |
